Dow Corning® Xiameter® RTV737 Series neutral cure sealant is clear in color and withstands a temperature rating of -65 to 177 degrees C. The slight odored paste sealant comes in a 90-milliliter tube. This 100% silicone rubber sealant has a relative density of 1.04. The sealant has a curing time of 24 hours or 7 days at room temperature upon exposure to moisture in the air. This product has a tensile strength greater than 175 ps

AeroShell Grease 7 is an advanced multi-purpose grease, composed of a synthetic oil thickened with Microgel, possessing good load carrying ability over a wide temperature range. It is inhibited against corrosion and has excellent resistence to water.
The useful operating temperature range is -73°C to +149°C.

AeroShell Fluid 41 is a mineral hydraulic oil manufactured to a very high level of cleanliness — "superclean" — and offers improved fluid properties. AeroShell Fluid 41 contains additives that provide excellent low temperature fluidity as well as exceptional anti-wear, oxidation/corrosion inhibition and sheer stability. Metal deactivators and foam inhibitors are included in this high viscosity index fluid to enhance performance in hydraulic applications. AeroShell Fluid 41 is dyed red.

AeroShell Fluid 41 is capable of a wide temperature range operation.
Useful operation temperature range unpressurized: -54° C to 90° C
Useful operation temperature range pressurized: -54° C to 135° C

AeroShell Fluid 41 is a mineral hydraulic oil manufactured to a very high level of cleanliness — "superclean" — and offers improved fluid properties. AeroShell Fluid 41 contains additives that provide excellent low temperature fluidity as well as exceptional anti-wear, oxidation/corrosion inhibition and sheer stability. Metal deactivators and foam inhibitors are included in this high viscosity index fluid to enhance performance in hydraulic applications. AeroShell Fluid 41 is dyed red.

AeroShell Fluid 41 is capable of a wide temperature range operation.
Useful operation temperature range unpressurized: -54° C to 90° C
Useful operation temperature range pressurized: -54° C to 135° C

The suffix for each grade corresponds to the viscosity of the oil at 210]F in Saybolt Universal Seconds.
The appropriate grades of these AeroShell Oil are approved for use in four-stroke (four-cycle)certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE-J-1966 (MIL-L-6082) and which od not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauted four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.

AeroShell Fluid 41 is a mineral hydraulic oil manufactured to a very high level of cleanliness — "superclean" — and offers improved fluid properties. AeroShell Fluid 41 contains additives that provide excellent low temperature fluidity as well as exceptional anti-wear, oxidation/corrosion inhibition and sheer stability. Metal deactivators and foam inhibitors are included in this high viscosity index fluid to enhance performance in hydraulic applications. AeroShell Fluid 41 is dyed red.

AeroShell Fluid 41 is capable of a wide temperature range operation.
Useful operation temperature range unpressurized: -54° C to 90° C
Useful operation temperature range pressurized: -54° C to 135° C

Dow Corning® Xiameter® RTV736 Series heat-resistant silicone sealant is red in color and has a specific gravity of 1.04. An acetic acid odored, paste sealant comes in a 90-milliliter tube. It has a tensile strength of 348.1 psi and requires 24 hours for curing. This product withstands a temperature of -65 to 260 degrees C.

AeroShell Fluid 3 is a general purpose muneral lubricating oil recommended for general lubrication of aircraft parts that require a light oil with good low temperature characteristics and a low freezing point. It is inhibited against oxidation and corrosion. AeroShell Fluid 3 is a relatively low viscosity product with good resistance to evaporation.

AeroShell Turbine Oil 750 is a 7,5 mm²/s synthetic mixed ester oil containing a thickener and additives which provide excellent load carrying, thermal and oxidation stability.

AeroShell Oil Diesel Ultra is a fully synthetic, multigrade engine oil designed for use un the new generation of compression ignition (Diesel) Aviation PIston Engines.
The formulation has been selected to be suitable in piston engines fuelled by Jet A or Jet A-1 and is designed for use in the latest highly rated turbocharged diesel engines under all operating conditions.

AeroShell Grease 14 is a helicopter multi-purpose grease composed of a mineral oil thickened with a calcium soap, possessing outstanding anti-fret and anti-moisture corrosion properties. It is oxidantion and corrosion inhibited. The useful operating temperature range is -54°c to +93°C.

Dow Corning® Xiameter® RTV732 Series multi-purpose silicone sealant is black in color and has a specific gravity of 1.04 at 25 degrees C. This acetic acid odored, paste sealant comes in a 90-milliliter tube. It has a tensile strength of 2.3 megapascals. This sealant requires 24 hours for curing and withstands a temperature of -60 to 180 degrees C.

MOLYKOTE D-321 R Anti-Friction Coating is a grey/black air-curing dry film lubricant.

Features and Benefits:

• Air drying
• Avoidance of stick-slip
• High aging resistance