The suffix for each grade corresponds to the viscosity of the oil at 210]F in Saybolt Universal Seconds.
The appropriate grades of these AeroShell Oil are approved for use in four-stroke (four-cycle)certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE-J-1966 (MIL-L-6082) and which od not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauted four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.

Dow Corning® Momentive™ RTV102 general-purpose silicone sealant is a one-component sealant that has a specific gravity of 1.05 and requires 3 days for full curing to form durable, resilient silicone rubber on exposure at room temperature and ambient humidity. This ready-to-use self-adhesive sealant has 26 grams per liter VOC contents that evaporate slowly without leaving any residues or stains. This acetic acid odored sealant has a flash point greater than 94 degrees C flash point and works at a temperature of 204 degrees C. This paste sealant is white in color and comes in a 2.8-ounce tube.

RTV122, RTV123 and RTV128 adhesive sealants are one-Cmponent. ready-to-use, and cure to a tough, resilient silicone rubber on exposure to atmospheric moisture at room temperature.

TYpical applications Include, but are not limited to, sealing vertical Joints bonding dl&&lmllar materials such as metal to plastic and glass to aluminum eleciJ'Icallnsulatlon of wfres and terminals and formed-In-place gasketing.

The following adhesive sealants are identical except for color:
RTV 122: While
RTV 123: Black
RTV 128: Translucent

AeroShell Fluid 41 is a mineral hydraulic oil manufactured to a very high level of cleanliness — "superclean" — and offers improved fluid properties. AeroShell Fluid 41 contains additives that provide excellent low temperature fluidity as well as exceptional anti-wear, oxidation/corrosion inhibition and sheer stability. Metal deactivators and foam inhibitors are included in this high viscosity index fluid to enhance performance in hydraulic applications. AeroShell Fluid 41 is dyed red.

AeroShell Fluid 41 is capable of a wide temperature range operation.
Useful operation temperature range unpressurized: -54° C to 90° C
Useful operation temperature range pressurized: -54° C to 135° C

AeroShell Grease 7 is an advanced multi-purpose grease, composed of a synthetic oil thickened with Microgel, possessing good load carrying ability over a wide temperature range. It is inhibited against corrosion and has excellent resistence to water.
The useful operating temperature range is -73°C to +149°C.

AeroShell Grease 14 is a helicopter multi-purpose grease composed of a mineral oil thickened with a calcium soap, possessing outstanding anti-fret and anti-moisture corrosion properties. It is oxidantion and corrosion inhibited. The useful operating temperature range is -54°c to +93°C.

AeroShell Grease 6 is a general purpose grease composed of a mineral oil thickened with Microgel, possessing good all-round properties within a limited range. It is inhibited against oxidation and corrosion and has good water resistance and low noise capability.
The useful operating temprature range is 640°C to +121°C.

AeroShell Grease 6 is a general purpose grease composed of a mineral oil thickened with Microgel, possessing good all-round properties within a limited range. It is inhibited against oxidation and corrosion and has good water resistance and low noise capability.
The useful operating temprature range is 640°C to +121°C.

Lubrifiant anticorrosion et antiusure contenant un additif dispersant sans cendres pour les moteurs 4-temps alternatifs CERTIFIÉS pour un usage en aéronef

Applications
- Moteurs 4-temps à pistons alternatifs certifiés pour un usage en aéronef, y compris les moteurs à injection ou à turbocompresseur
- La plupart des moteurs d?aéronef à cylindres opposés de chez Lycoming et Continental fonctionnant à des températures ambiantes modérées
- Moteurs radiaux fonctionnant dans des conditions climatiques où un grade 100 est conseillé.

AeroShell Fluid 41 is a mineral hydraulic oil manufactured to a very high level of cleanliness — "superclean" — and offers improved fluid properties. AeroShell Fluid 41 contains additives that provide excellent low temperature fluidity as well as exceptional anti-wear, oxidation/corrosion inhibition and sheer stability. Metal deactivators and foam inhibitors are included in this high viscosity index fluid to enhance performance in hydraulic applications. AeroShell Fluid 41 is dyed red.

AeroShell Fluid 41 is capable of a wide temperature range operation.
Useful operation temperature range unpressurized: -54° C to 90° C
Useful operation temperature range pressurized: -54° C to 135° C

Henkel Loctite LB 8008™ C5-A™ anti-seize lubricant is copper in color and safeguards metal parts from rust, corrosion, galling and seizing. The paste anti-seize lubricant has a vapor pressure less than 0.6 millibars and less than 3% VOC contents that evaporate without leaving any residues or stains. It has a flash point greater than 93 degrees C, specific gravity of 1.2 to 1.4 at 25 degrees C and a boiling point greater than 260 degrees C. The copper-based anti-seize lubricant has a mild odor and comes in a 1-pound can. It operates at a temperature range of -29 to 982 degrees C.

Dow Corning® Momentive™ RTV106 high-temperature silicone sealant. This one-component sealant has a specific gravity of 1.07 and requires 3 days for full curing to form durable, resilient silicone rubber on exposure at room temperature and ambient humidity. This ready-to-use self-adhesive sealant has 26 grams per liter VOC contents that evaporate slowly without leaving any residues or stains. This acetic acid odored sealant has a flash point greater than 93.3 degrees C and works at a temperature of 260 degrees C. This paste sealant is red in color and comes in a 2.8-ounce tube.

AeroShell straight mineral oils are blended from selected high viscosity index base stocks. These oils do not contain additives except for a small quantity of pourpoint depressant (wich is added when improved fluidity at very low temperature is required) and an anti-oxidant.

Dow Corning® Xiameter® RTV732 Series multi-purpose silicone sealant is black in color and has a specific gravity of 1.04 at 25 degrees C. This acetic acid odored, paste sealant comes in a 90-milliliter tube. It has a tensile strength of 2.3 megapascals. This sealant requires 24 hours for curing and withstands a temperature of -60 to 180 degrees C.